Water Sampler Acrylic (Kemmerer)

• All plastic construction
• Clear acrylic or opaque PVC bottle body
• PVC center shaft
• Not suitable for chemical sampling
• Polyurethane seals for general sampling
• Large range of sizes - 1.2 to 8.2 L
•      Water sampler only

These Kemmerer bottles has no metal parts to contact your sample. Delrin fasteners and an O ring replace the stainless steel garter spring in the All-Angle™ trip head. The bottle body can be either transparent acrylic, which allows you to view your sample before removal, or opaque PVC for greater durability. The all-plastic center shaft is made of plastic CPVC with a plastic delrin nut on its bottom.

These samplers are designed for general sampling only and are not suitable for chemical analysis of contents due to the potential for contamination (i.e. by mercury and phosphorus) by the materials in the sampler's construction. For chemical analysis, choose our Beta or suggested Kemmerer water samplers.

The end seals mount like a tire on a hub and are easy to replace. The end seals should not be sealed, seated, or fully closed during storage. Although made of tough elastomers, they have a tendency to take a set during long periods of inactivity and stress. For this reason, store your Kemmerer with the seals slightly open and not touching the bottle body.

Sampler kits include one stainless steel split messenger, 100ft of line, and a carry case. These samplers require messengers and line (not included, except in kits) for operation. A thermometer can be mounted inside acrylic Kemmerer bottles, please call for information.

INFO & PEMESANAN

CV Globalindo Teknik Mandiri
(Divisi Alat Test & Klimatologi)
Jl. Raya Johar No.26 RT 5/4 Kel.Cibadak,
Kec.Tanah Sareal, Kota Bogor 16161

Telp/Fax:
0858 8888 7980
0813 1421 0880

Email:
info@globalindoteknikmandiri.co.id